These thermocouple temperature sensors are designed to measure temperatures up to 600 °C (short time 650 °C). When combining sensor and stainless steel centre holder or thermowell, supplied as accessories, the sensors are possible to be used for temperature measurement in various applications in the industrial environment, for example even as pressure equipment within the meaning of the Government Regulation No. 26/2003 Coll. as amended. Maximum permitted operating pressure is 6.3 MPa (applies for case maximum length of up to 300 mm). The thermocouple temperature sensors are possible to be used for any control systems compatible with selected thermocouple type. The temperature sensors meet ingress protection IP 68 5 bar / 30 minutes according to the EN 60 529 standard, as amended. The standard measurement range is -50 °C to 600 °C (short time 650 °C). Maximum temperature around the head is 150 °C.
The thermocouple temperature sensors are intended for operation in chemically non-aggressive environment.
ACCESSORIES
- metal central holder K 120
- stainless steel thermowell JPTS 641
- screw with collet or cutting rings – if different lengths of stem immersion of the temperature sensor are set
DECLARATION, CERTIFICATION, CALIBRATION
- EU Declaration of Conformity – in accordance with Act 22/1997 Coll. on technical requirements on products as amended.
- Calibration – The final metrological inspection – comparison with standards or working instruments – is carried out for all the products. Continuity of the standards and working measuring instruments is ensured within the meaning of the Section 5 of Act no.505/1990 on metrology. The manufacturer offers a possibility to supply the sensors calibrated in SENSIT s.r.o.’s laboratory (according to requirements of the EN ISO/IEC 17025 standard, as amended) or in an Accredited laboratory.
- SPECIFICATIONS
- DIMENSIONAL DRAFT
- WIRING DIAGRAM
- MODIFICATIONS
- DOWNLOAD
| Sensor type with smooth stem Sensor type with welded-on thread | TCS 64K TCS 66K | TCS 64J TCS 66J |
| Type of thermocouple | thermocouple "K" | thermocouple "J" |
| Measuring range | -50 to 600 °C, short time up to 650 °C |
| Other parameters | |
| Type of thermocouple | "J" and "K", single, double |
| Accuracy class | standardly 2 in accordance with EN 60584, as amended and DIN 43 710, further 1 |
| Versions | with an isolated measuring point |
| Diameter of the stem | 6 mm |
| Standard length of the stem | 50, 100, 160, 220, 280, 340 and 400 mm |
| Nominal pressure of the stem | PN 63 (with a thread) up to 400 °Cand length of the stem 300 mm |
| Thread types for variant with thread | G 1/2"; M 20 x 1.5; M 27 x 2; others on customer's requirements |
| Material of the stem | stainless steel DIN 1.4571 |
| Recommended wire cross section | 0.35 to 1.5 mm2 |
| Ingress protection | IP 68 (1 bar) acc. EN 60529, as amended |
| Type of connection head | LIMATHERM NAA |
| Material of connection head | aluminium alloy |
| Ambient temperature around the connection head | -30 to 150 °C |
| Weight | 0.2 kg for 100 mm length |
Note: Manufacturer reserves the right to make changes in design and technical characteristics of the products. For actual information, please always contact your dealer.