These thermocouple temperature sensors with a connector TC 03F and TC 03M are designed for temperature measurements of gaseous or liquid substances. Temperature range is up to 1 100 °C depending to the thermocouple type and to the production technology used. The temperature sensors with a connector consist of a thermocouple and connector, which is an integral part of the case. The temperature sensors with a connector meet ingress protection IP 50 according to EN 60 529 and they are designed for temperature measurement in pipelines.
The thermocouple temperature sensors with a connector are intended to be used in operation in chemically non-aggressive environment.
ACCESSORIES
- connectors
- screw with collet or cutting rings – if different lengths of stem immersion of the temperature sensor are set
DECLARATION, CERTIFICATION, CALIBRATION
- Manufacturer provides EU Declaration of Conformity.
- Calibration – The final metrological inspection – comparison with standards or working instruments – is carried out for all the products. Continuity of the standards and working measuring instruments is ensured within the meaning of the Section 5 of Act no.505/1990 on metrology. The manufacturer offers a possibility to supply the sensors calibrated in SENSIT s.r.o.’s laboratory (according to requirements of the EN ISO/IEC 17025 standard) or in an Accredited laboratory.
- SPECIFICATIONS
- DIMENSIONAL DRAFT
- WIRING DIAGRAM
- DOWNLOAD
| Sensor type | TC03F | TC03M |
| Thermocouple type | "J" and "K" (other on request), single and double | |
| Ingress protection | IP 50 in accordance with EN 60529, as amended | |
| Design | jacketed thermocouple with insulated measuring point | |
| Diameter of the jacketD | 1,5; 2; 3; 4,5 and 6 mm | |
| Length of the measuring part L | from 20 to 300 mm standardly, others as customer's requirements | |
| Measuring range - on measuring point | "K" type up to 1 100 °C - according to the diameter of measuring part "J" type up to 700 °C other depending on the type | |
| Accuracy class | standard 2 according to the EN 60584, as amended and DIN 43 710 | |
| Jacket material | Inconel 2.4816 for TC "K", stainless steel DIN 1.4541 for TC "J" | |
| Sensor body | flexible, shapeable | |
| Type of connector | female | male |
| Temperature around connector | -30 to 220 °C | |
| Weight | 0.03 kg for housing length 100 mm and 1 m lead |
Note: Manufacturer reserves the right to make changes in design and technical characteristics of the products. For actual information, please always contact your dealer.