HD2717T serie – מד לחות, טמפרטורה נייח
The instruments of the HD2717T… series are transmitters, indicators, and ON/OFF regulators with data logging functions, they measure temperature and humidity.
The main feature of these instruments is their interchangeable probe. The probe can be replaced by the user without process interruption. Thus, the probe can be calibrated or repaired at a later time.
The instrument is available in three different versions: with horizontal probe (S.TO), vertical probe (S.TV) or with remote probe (S.TC), having the probe connected to the electronics by means of a cable of various lengths. The S.TO and S.TV probes are made of stainless steel AISI304, the S.TC probes can be of stainless steel AISI304 or plastic material. For the measurement of dew point in compressed air systems, the S.TC2.480.2 probe can be used.
The probe is factory calibrated and ready to use, it is provided with a SICRAM2 module which stores the calibration data of the probe, allowing the interchangeability of the probes. The instruments measure:
Temperature in Celsius or Fahrenheit temperature scale
All models have both current and voltage outputs.
Some models are fitted with two control relays and one alarm relay, configurable by the user.
All models are fitted with a multistandard RS232/RS485 serial port and an auxiliary RS232C standard serial output. The RS485 serial output allows the management of more than one device in a network.
The models HD2717T… can be with or without LCD. The display shows on the first line the relative humidity or a derived parameter and on the second line the temperature in degrees
Celsius or Fahrenheit.
The data logger function allows to store the measures with a selectable storage interval.
The instrument setup remains permanently stored, while the real time clock is protected by an apposite Lithium battery against temporary mains voltage interruptions.
The power supply can be chosen, at the time of placing the order, between 24Vac/dc or universal 90…240Vac.
S.TV Vertical probe L= 130mm
The material of the S.TC…probes can be chosen between stainless steel AISI304 or plastic material. (recognized by the letter P in the code)
S.TC1.2 and S.TC1.2P Probe L=135mm with cable 2m
S.TC1.5 and S.TC1.5P Probe L=135mm with cable 5m
S.TC1.10 and S.TC1.10P Probe L=135mm with cable 10m
S.TC2.2 and S.TC2.2P Probe L=335mm with cable 2m
S.TC2.5 and S.TC2.5P Probe L=335mm with cable 5m
S.TC2.10 and S.TC2.10P Probe L=335mm with cable 10m
Interchangeable probes complete with SICRAM2 module for temperature and humidity, horizontal
S.TO1 horizontal probe L= 135mm
S.TO2 horizontal probe L= 335mm